Motorola Timeport 250 - Manual (Page 89)

Using the Options Menu 85 English
! If the PIN number is entered incorrectly three times in a
row, your SIM card will automatically lock-up and the
Blocked message will be displayed.
Unblocking Your Phone
If you receive the
Blocked message you will need to enter an
unblock code and key sequence before you can use the phone.
AThe 8 digit PIN unblocking code will have been provided
with your SIM card by your Cellular Service Provider.
Enter the following key sequence to unblock your phone:
<<05<EO
FOFO
The new PIN code must contain four to eight digits.
! If this operation is performed incorrectly 10 times in a
row, your SIM card will become permanently blocked.
Change SIM PIN2 Code
This option is used to change your PIN2 security code.
When you select this option you must enter the old PIN2 security
code before you can proceed.
You will be asked to enter a new, four to eight digit code to
replace the old PIN2 security code. The new PIN2 security code
must be entered again as confirmation.
! If the PIN2 security code is entered incorrectly three
times in a row, the Blocked message will be displayed.
When the Blocked message is displayed, you are not allowed
access to menu items that require you to enter the PIN2 code, for
example ‘Setup Fixed Dialling’ and ‘Call Charge Settings’.
If you receive the Blocked message when you try to enter your
PIN2 code, you will need to unblock and change the code using
the following key sequence:
<<052<EO
JOJO
AThe 8-digit unblocking code will have been provided with
your SIM card by your Cellular Service Provider.
! If the PIN2 unblocking operation is performed
incorrectly 10 times in a row, your PIN2 code will
become permanently blocked.
j New Security Code
The security code is used to control access to security and other
options within the menus.
This option is used to change the security code, which is set at
manufacture to 000000.
Once selected, you will be asked to enter the current security
code before you can proceed.
You will then be asked to enter a new, six digit code to replace
the old security code.
AIn order to safeguard your phone, you should change your
security code from the factory setting as soon as possible.
j Extended Menus
i Press and hold $. Extended Menus will be temporarily
activated until you exit the Options menu.
This option is used to switch the extended menus on or off.
jade_en.bk : opt_menu.fm5 Page 85 Wednesday, October 11, 2000 9:58 PM