2 installing cpus, Installing cpus – SIIG Transport GX21 B5350 User Manual
Page 18
Advertising
2.2 Installing motherboard components
12
Chapter 2: Setting up
2.2.2 Installing CPUs
This section describes how to install Intel® Xeon processors
and heatsinks in your Transport GX21 (B5350) system. This
section applies to all models.
1. Remove the chassis cover as described in section 2.2.1
2. Locate the CPU sockets on the motherboard as shown
below.
3. Turn the motherboard upside down to install the heat sink
springs, in the order shown. See 3.2.2 Replacing the
motherboard for instructions on how to remove the moth-
erboard.
A
Advertising