SIIG Transport GX21 B5350 - Manual (Page 42)

3.6 Replacing the power supply
36 Chapter 3: Replacing installed components
3.6 Replacing the power supply
Follow these instructions to replace the power supply in your
Transport GX21 (B5350) system.
1. Remove the chassis cover as described in section 2.2.1
Removing the chassis cover.
2. Disconnect power cables from the motherboard, back-
planes, FDD, CD-ROM drive and fans. See 2.3 Installing
a hard drive, 3.2.1 Disconnecting all motherboard
cables, section 3.3 Replacing the CD-ROM drive, 3.5
Replacing the storage backplane, and section 3.4
Replacing the LED control board for details on how to do
this.
3. Remove the two screws that secure the power supply to
the chassis and lift the unit free.