I/o device configuration submenu – SIIG Transport GX21 B5350 User Manual
Page 60
54
Appendix
I/O Device Configuration submenu
You can use this screen to configure I/O Devices.
Feature
Option
Description
Serial port A
Enabled / Disabled
Turn serial port A on or off
Base I/O address
3F8 / 2F8 / 3E8 / 2E8 Set the base I/O address for
serial port A
Interrupt
IRQ3 / IRQ4
Set the interrupt for serial port A
Serial port B
Enabled / Disabled
Turn serial port B on or off
Base I/O address
3F8 / 2F8 / 3E8 / 2E8 Set the base I/O address for
serial port B
Interrupt
IRQ3 / IRQ4
Set the interrupt for serial port B
Mode
Normal / IrDA / ASK-
IR
Set the mode for the type of
device to be attached to serial
port B
Parallel Port
Enabled / Disabled
Turn the parallel port on or off
Mode
SPP / EPP / EC
Set the mode for the type of
device to be attached to the par-
allel port
Base I/O and Inter-
rupt
Disabled
378/IRQ7
278/IRQ5 3BC/IRQ7
Set the base I/O address and
interrupt for the parallel port