SIIG Transport GX21 B5350 - Manual (Page 33)

3.1 Introduction
Chapter 3: Replacing installed components 27
Chapter 3: Replacing installed components
3.1 Introduction
This chapter describes how to replace all the pre-installed
components of your Transport GX21 (B5350), including
motherboard, CD-ROM drive, floppy disk drive and LED con-
trol board. There is also a section covering the replacement
for two 1-port S-ATA backplanes.
Before you attempt to replace any components, make sure
you have read section 2.1 Before you begin, in chapter 2,
which describes the precautions you need to take and the
tools you will require.
3.2 Replacing motherboard components
Follow these instructions to remove motherboard compo-
nents and replace the motherboard.
3.2.1 Disconnecting all motherboard cables
When replacing the motherboard or certain motherboard
components, it my be necessary to remove cables connected
to the motherboard.