Sony CDP-CX260 - Manual (Page 15)

15
Playing CDs Getting Started Playing CDs Playing CDs
Display information while playing a disc
Each time you press TIME/TEXT, the display shows
the information as shown below.
The current disc
number, track
number and
playing time
appear.
Press TIME/TEXT.
The current track
title appears.
This information also appears when
the player locates the track.
To play disc highlights Z
Some CD TEXT discs have a feature to play only the
highlights of the discs.
During stop mode, press HIGH-LIGHT on the remote to start
playing disc highlights.
“Hi LIGHT” flashes while playing disc highlights.
If you press HIGH-LIGHT while selecting discs without this
feature, “NO HIGHLIGHT” appears in the display.
ALL DISCS NEXT
DISC
CD TEXT CD1
DISC TRACK MIN SEC
ALL DISCS NEXT
DISC
CD TEXT CD1
TRACK
1 3
1 2 1 1 . 5 2
1 3
H i t e c h B l u e s
Checking the information of CD TEXT discs
CD TEXT discs have information, such as the disc titles
or artist names, memorised in a blank space on the
discs where, on normal discs, there is no information.
The display shows the CD TEXT information of the
disc so that you can check the current disc title, artist
name and track title. When the player detects a CD
TEXT disc, “CD TEXT” appears in the display. If your
CD TEXT disc has multi-language capacity, “MULTI
CD TEXT” appears in the display. If you want to check
the information in another language, refer to “Selecting
the language of the CD TEXT information” on page 15.
Display information in stop mode
The display shows the disc title. When you press
TIME/TEXT, the artist name scrolls in the display. If
you press TIME/TEXT again, the display shows the
current disc number, total number of tracks, and total
playing time of the disc momentarily. Then the display
shows the disc title again.
Selecting the language of the CD TEXT
information
You can select the language used to display the CD
TEXT information when you select a CD TEXT disc
with multi-language information.
Once you select the language, the display shows the
information in the selected language until you turn off
the player. If the player cannot read the language
memorised in a CD TEXT disc, “(other lang.)” appears.
1 Press INPUT in stop mode.
“Select lang.” flashes.
2 Push the JOG dial.
The current operating language flashes.
3
Turn the JOG dial until the language you want
appears in the display.
4 Push the JOG dial to select the language.
“Reading Text” appears momentarily, then the
display shows the information in the selected
language.
To check the current language
1 Press INPUT while playing a CD TEXT disc.
“Show lang.” flashes.
2 Push the JOG dial.
The current language appears momentarily.
You can also check the current language while selecting a CD
TEXT disc without multi-language information.
Note
If you select a CD TEXT disc which does not contain the
information of the selected language, the display shows the
information in another language according to the disc’s
priority.
Press TIME/TEXT.
ALL DISCS
CD TEXT CD1
DISC
S O N Y H I T S
ALL
S e l e c t l a n g .
DISCS
MULTI CD TEXT CD1
2 1
ALL
E n g l i s h
DISCS
MULTI CD TEXT CD1
2 1
Note
If the disc title and track title have more than 13 characters,
only the first 13 characters appear in the display.