Sony CDP-CX260 - Manual (Page 24)

Playing CDs
24
Memo s e a r c h
P r o g r am p l a y
P r o g r am i n p u t
G r o u p s e l e c t
CD1
: A P r o g r am A
B : P r o g r am B
C : P r o g r am C
D : P r o g r am D
CD1
[ P r o g r am A ]
1 :
2 :
3 :
CD1
[ P r o g r am A ]
S t e p 1
D i s c 5 6 TRK - A L L
* D I SC - 5 6 *
CD1
[ P r o g r am A ]
S t e p 1
D i s c 5 6 TRK - 5
* D I SC - 5 6 *
CD1
Memo s e a r c h
P r o g r am p l a y
P r o g r am i n p u t
G r o u p s e l e c t
CD1
: A P r o g r am A
B : P r o g r am B
C : P r o g r am C
D : P r o g r am D
CD1
Creating a program observing the remote’s
display Z
You can create up to eight programs in the remote’s
memory, each containing up to 32 steps by observing
the remote’s display.
1 Press MENU.
2 Move the cursor (”) to “Program input” by using
the Easy scroll key, then press the Easy scroll key.
3 Move the cursor to the program you want to
create, then press the Easy scroll key.
4 Press the Easy scroll key.
5 Select the desired disc by pushing the Easy scroll
key up or down.
To program a whole disc, press the Easy scroll key
again.
To program a certain track of the disc, select the
desired track by pushing the Easy scroll key up or
down, then press the Easy scroll key.
6 Repeat Steps 4 and 5 to program more tracks or
discs.
To finish creating a program, press MENU. To play the
program you create, see “Playing the program you
create observing the remote’s display” on page 24.
To erase a track or disc, move the cursor to the step
you want to erase in Step 3, then press CLEAR.
To change a disc or track you programed, move the
cursor to the step you want to change in Step 3, then
press the Easy scroll key. Select a new disc or track
following Steps 4 and 5.
You can label the program in Step 3
Move the cursor (”) to the program you want to label by
pressing the Easy scroll key up, then press the Easy scroll
key.
The flashing cursor (“) appears. Input the character you
want following the procedure in “Labeling discs
observing the remote’s display” on page 30.
Note
You cannot program the second player’s tracks by using the
remote.
Playing the program you create observing
the remote’s display Z
1
Press MENU.
2
Move the cursor (”) to “Program play” by using
the Easy scroll key, then press the Easy scroll key.