Servis-Rhino RC-12 - Manual (Page 19)

SAFETY
RC12 12-05 Safety Section 1-15
© 2005 Alamo Group Inc.
SAFETY
Concluding Safety Instructions and Practices
NOTE: Rhino supplies safety decals on this product to promote safe operation. Damage to the decals may
occur while in shipping, use, or reconditioning. Rhino cares about the safety of its customers, operators, and
bystanders, and will replace the safety decals on this product in the field, free of charge (Some shipping and
handling charges may apply). Contact your Rhino dealer to order replacement decals.
Always disconnect the main PTO Driveline from the Tractor before performing service on the Mower.
Never work on the Mower with the tractor PTO driveline connected and running. Blades or Drivelines could
turn without warning and cause immediate entanglement, injury or death.
(SRM-3)
Wear gloves and exercise care when handling blades. Blades are SHARP and can cause
lacerations to hands and other parts of the body if not safely handled.
(SSM-09)
To prevent tipping of Implement when stored in folded position, use carrying wheels or adequate
stands on center frame.
(S3PT-6)
In addition to the design and configuration of this Implement, including Safety Signs and Safety Equipment,
hazard control and accident prevention are dependent upon the awareness, concern, prudence, and proper
training of personnel involved in the operation, transport, maintenance, and storage of the machine. Refer
also to Safety Messages and operation instruction in each of the appropriate sections of the Tractor and
Equipment Manuals. Pay close attention to the Safety Signs affixed to the Tractor and Equipment.
(SG-18)