Option 1: aux in cable installation instructions – Sirius Satellite Radio PowerConnect XMP3IVKUG0210 User Manual
Page 39
Advertising
39
Option 1: Aux In Cable Installation Instructions
1 Plug one end of the Aux In Cable into the green AUDIO connector
on the dock .
2 Plug the other end into the auxiliary
input jack connection of your
vehicle’s stereo system .
3 Insert the dock into the mount .
4 Insert your Satellite Radio into the
dock .
5 Power on your Radio sliding the
Power/Lock switch down .
6 Be sure the vehicle is outside and the antenna
has a clear view of the sky . Verify that you are
receiving the XM signal . There should at least
be one bar on the lower left corner of the main
display screen that denotes antenna signal
strength . You can also press menu and then
press
to scroll to and highlight Signal
ANT
FM
AUDIO
PWR
ANT FM AUDIO
PWR
Advertising
This manual is related to the following products: