Sirius Satellite Radio PowerConnect XMP3IVKUG0210 - Manual (Page 55)

55
OR
2 Manually tune through your local FM channels
Manually tune through your local FM channels on your vehicle’s
FM radio . Turn on your vehicle’s FM radio . Start at 88 .1 and use the
‘Manual’ tune function on your vehicle’s FM radio to tune through
each FM channel one-by-one (88 .1 followed by 88 .3 etc .) to locate
channels that aren’t being used by a local FM radio station . Write
down each FM channel that has only static or silence on it, until
you reach 107 .9 . Once you have created your list of available FM
channels, you will need to find the one that provides the best
match for your Satellite Radio .
Now, tune your Satellite Radio to a favorite XM channel (or to
channel 1, if it’s not yet activated) . Pick the first FM channel on
your list and tune the FM radio to that channel . Then tune your
Satellite Radio to the same FM channel . (Consult your Satellite
Radio’s User Guide if you are unsure how to tune it to the same FM
channel .) You should hear the XM channel through your vehicle’s
radio . If you are satisfied with the sound quality, you’re done! If
this FM channel doesn’t work well for you, work down your list until
you find an FM channel that allows you to hear XM clearly .
NOTE! You may find an FM channel with static or silence that does not work
with your Satellite Radio . It is possible that some type of inaudible interference
is present that prevents reception of the broadcast . Your only options are to
use another FM channel or a different audio connection method .