Sony STORSTATION LIB-D81 - Manual (Page 43)

43
Appendix
• Try cleaning the AIT drive. t “Cleaning the AIT Drive” (page 37) in
Chapter 5, “Cleaning the AIT Drive”.
The cartridges cannot be ejected
• Follow the instructions in “Ejecting/Changing Cartridges” (page 34) in
Chapter 4, “Operating the AIT Autoloader”.
If you are still unable to eject cartridges, please contact your dealer for
assistance.
• If you are unable to eject the cartridge in the AIT drive, perform the following
procedure.
1 On the front of the AIT autoloader, press the DOOR button for
at least five seconds.
[E J] flashes on the message display. The cartridge in the AIT drive is
automatically ejected and returned to its original slot.
The front door is then unlocked and [o P] appears on the message display.
Notes
• When the original position of the cartridge is unknown, such as after
restarting the AIT autoloader, the cartridge is inserted in the highest
available slot.
• When you press the DOOR button for at least five seconds when there is
not cartridge in the AIT drive, [E J] flashes on the message display and
the front door is unlocked.
2 When you are certain that [o P] on the message display has
stopped flashing, open the front door and eject the cartridge.
The front door does not open
If pressing the DOOR button fails to unlock the front door, perform the
following.
• On the front of the AIT autoloader, press the DOOR for at least five seconds.
[E J] flashes on the message display and the front door is unlocked.
• If the above fails, remove the protective cap at the base of the AIT autoloader
as illustrated below, and then use a pointed object such as a ballpoint pen to
press the release button. The front door unlocks allowing you to open it.
Remove the protective cap with a
screwdriver, and then use a pointed
object such as a ballpoint pen to
press the release button.
AIT autoloader base