SmartBridges sB3410 - Manual (Page 20)

Page 20 of 66
i n t e l l i g e n t w i r e l e s s p l a t f o r m
airClient™ Nexus User Guide
2.6. airClient Router/NAT to airClient Bridge
Follow the steps below to change airClient Router/NAT mode to airClient Bridge Mode
1. Go to ‘Tools | System Configuration’ drop down menu. The ‘System Configuration’ will be
displayed.
2. Click on the ‘Current Operational Mode’ link to go to the ‘System Configuration’ page. Choose
‘Bridge under the ‘Remote Device’ option.
3. Click on ‘Apply Changes’. A confirmation pop-up window will be displayed.
4. Enter the fields for ‘IP Address’, ‘IP Mask’ and Gateway for ‘Ethernet Configuration’.
5. Enter the MAC address and the SSID of the remote radio.
6. Enter the Channel and Domain.
7. Click on the ’Apply Changes’ button to change the settings.
8. The device will be rebooted and set to the chosen operational mode.
Figure 2-8 Changing airClient Router/NAT to airClient Bridge