SmartBridges sB3410 - Manual (Page 51)

Page 51 of 66
i n t e l l i g e n t w i r e l e s s p l a t f o r m
airClient™ Nexus User Guide
(there is one already specified by default) and the time zone. After enabling the delayed
reset,
specify a time which is valid in reference to current time. When recurrence is set
to weekly, monthly or daily, the reference is made with the first set time i.e. Reset time.
Figure 7-3 Delayed Reset Settings
For delayed reset, follow the steps below:
1. Select date from the calendar that has been provided.
2. Select the recurrence.
3. Click ’Apply Changes’ button to change the settings.
4. To disable ‘Delayed Reset’, check the box provided.
7.1.3. NTP Time Server Setup
The device time comes from the network time information source. The device needs access to a network
timer (NTP time server) source. The NTP time server IP can be configured as follows:
1. From the ’System Configuration’ page, click on the ’NTP Server Setting’ link.
2. A ‘Time Settings’ page will be displayed. Click on the ‘NTP Server Settings’ link to enable timer
settings input.
3. Enter a valid NTP server IP address and select the Time Zone. The default NTP server is
128.250.36.2 and the default Time Zone is Singapore.
4. Click on the ’Apply Changes’ button to configure the NTP. The network time will appear on the
browser if NTP server is contactable.