SmartBridges sB3410 - Manual (Page 52)

Page 52 of 66
i n t e l l i g e n t w i r e l e s s p l a t f o r m
airClient™ Nexus User Guide
Note: Please ensure that the NTP server IP is accessible from the device. Use the ping test tool from
the ’Tools | Link Test’ to check if the NTP server can be pinged from the device. The device can
still operate without the Time Server configuration but you will not be able to perform the Delayed
Reset function.
Figure 7-4 NTP Time Settings
7.2. Profile Manager
The airClient Nexus configuration parameters can be saved as profiles in the system. There are four
profiles available in the system:
1. Installation profile
2. Profile1
3. Profile1
4. Profile3
All the four profiles contain the same default parameters. You can save the current configurations to any
of the four profiles and re-load the profiles later on or create different configurations and save them under
different profiles. These can be loaded at different times based on a pre-defined calendar schedule.
The Profile Manager Configuration page can be accessed from the navigation menu bar ‘Tools | Profile
Manager’ dropdown menu. The following figure displays the Profile Manager page.