Sharp ER-A520 - Manual (Page 18)

16
Insert the keyboard sheet between the keyboard cover and the cabinet as illustrated below. Then press the
claws at the top of the keyboard cover into the slots in the cabinet.
• Do not spread the keyboard cover too far to avoid tear ing the tabs.
• Replace the keyboard sheet with a new one if by chance it gets wet. Use of a wet keyboard
sheet may cause problems.
• Be sure to use only SHARP-supplied keyboard sheets. Thick or hard sheets can make key
operations difficult.
• Place the keyboard sheet evenly under the keyboard cover.
• If you require a new keyboard sheet, please contact your dealer.
• The keyboard cover will eventually wear out. If your keyboard cover is dirty or broken, replace the
cover with a new one. For details, please contact your authorized SHARP dealer.
Note
Keyboard
sheet
Cabinet
Keyboard cover
Installing the keyboard sheet (ER-A530) 4
028 029 030 031 021 022 023 024 025 026 027
039 040 041 042 032 033 034 035 036 037 038
050 051 052 053 043 044 045 046 047 048 049
061 062 063 064 054 055 056 057 058 059 060
072 073 074 075 065 066 067 068 069 070 071
083 084 085 086 076 077
087 088
099 100
078 079 080 081 082
096 097 098 089 090 091 092 093 094 095
108 109 110 101 102 103 104 105 106 107
118 119 120 111 112 113 114 115 116 117
For ER-A530