Sharp ER-A520 - Manual (Page 86)

84
Your machine is equipped with 2000 standard PLU/UPC codes. Your machine allows you to perform the
following programming for each PLU/UPC.
• Please note that the price lookup/subdepartment/UPC key (
P
for ER-A520) is shown as .
• To review the UPC codes available to this register, please refer to the chapter 13 in “Universal
Product Code(UPC) or European Article Number(EAN)”.
•
Ä
in Procedures indicates that you scan a barcode.
Unit price
* In case that price shift function is allowed, the register prompts to enter a unit price for the following level by
displaying “P2” thru “P6” on the display, and when a unit price of level 6 is entered, the register goes to the
status for programming the following PLU/UPC. When you press the
Ç
on the way of programming multiple
prices for a PLU/UPC code, prices for the remained levels are kept unchanged.
In case that single price entry is allowed for a PLU/UPC code, the register goes to the status for programming
the following PLU/UPC.
Unit price
(In case of single price entry)
1
P
1000 ı
Ç
Print Key operation
Example
Ç
PLU code (max. 5 digits)
* To program unit price 2 thru 6 (only when price shift function is allowed.)
To program for the following PLU/UPC
To program any PLU/UPC
To keep current setting
l
Direct PLU key
Unit price 1
(max. 6 digits)
ı
PLU/
UPC
Ä
UPC code (6 to 13 digits)
5
Level no.
(1 to 5)
ä
Procedure
PGM 2 PGM 1
PLU/
UPC Note
PLU/UPC programming 3
Commission
group no.
HALO
Taxable1
Food stampstatus F:Eligible
(None):Ineligible
IJKLMN
Group no.
1000000100000317 @ 1
Ç
Print Key operation
Example
PLU/
UPC