Sharp ER-A520 - Manual (Page 99)

97
Setting the register number
When your store has two or more registers, it is practical to set separate register numbers for their identification.
You may set them with a maximum of six digits.
To set the register number as “123456”
Setting the consecutive number
The consecutive number is increased by one each time a receipt is issued.
Enter a number (one to four digits) that is one less than the desired starting number.
Setting the count start number as “1001”
Consecutive
number
2613 . @
1000 Ç
Print Key operation
Example
. @
2613
Ç A number (one to four digits) that is one
less than the desired starting number
To begin the count from 0001
Procedure
2613 PGM 2
Register
number
2612 . @
123456 Ç
Print Key operation
Example
2612
. @ Ç Register number
(one to six digits)
To set the register number “0”
Procedure
2612 PGM 2
Setting the register and consecutive numbers 2