Sharp MX-B201D - Manual (Page 114)

OPTIONAL EQUIPMENT
113
Using the MX-CS10 with the printer function
To use the MX-CS10 with the printer function, follow these steps to adjust the
settings in the printer driver.
1 Click the "start" button.
2 Click "Control Panel", select "Printer and Other Hardware", and
then click "Printer and Faxes".
• On Windows Vista/7, click "Control Panel", and then click "Printer".
• On Windows 2000, select "Setting" and click "Printers".
3 Click the "SHARP MX-XXXX" printer driver icon and from the
"File" menu select "Properties".
• On Windows Vista/7, from the "Organize" menu select "Properties".
4 Click the "Configuration" tab.
5 Select "Two trays" for "Input tray
option", and click "OK".
The printer driver closes. This completes
the settings needed to use the MX-CS10.
Interface cable
Please purchase the appropriate cable for your computer.
USB interface cable
USB cable that supports USB 2.0.
The printer driver cannot be set for use with the MX-CS10 when opened
from the application.