Sharp MX-B201D - Manual (Page 92)

TROUBLESHOOTING AND MAINTENANCE
91
Paper misfeed.
Misfeed occur.
→ To remove the misfeed, see "MISFEED
REMOVAL".
101
The paper is outside of the specified
size and weight range.
→ Use copy paper within the specified
range.
11
Paper curled or damp.
→ Do not use curled or crimped paper.
Replace with dry copy paper. During
periods when the machine is not used
for a long time, remove the paper from
the tray and store it in a dark place in a
bag to prevent moisture absorption.
-
Paper is not loaded properly.
→ Make sure that the paper is properly
loaded.
12
Pieces of paper inside machine.
→ Remove all pieces of misfed paper.
102
Too much paper is loaded in the tray.
→ If the stack of paper is higher than the
indicator line on the tray, remove some
of the paper and reload so that the
stack does not exceed the line. 12
Some sheets of paper stick together.
→ Fan the paper well before loading it.
12
The guides on the bypass tray do not
match the width of the paper.
→ Adjust the guides to match the width of
the paper.
15
The bypass tray extension is not
opened.
→ When loading a large size of paper,
open the extension.
15
White or black lines
appear on copies.
The scanner glass for the RSPF is dirty.
→ Clean the long, narrow scanning glass.
109
The transfer charger is dirty.
→ Clean the transfer charger.
110
Problem Cause and solution Page