Sharp MX-B201D - Manual (Page 72)

SCANNER FUNCTIONS
71
Scanning from a WIA-compliant application
(Windows XP/Vista/7)
If you are using Windows XP/Vista/7, you can use the WIA driver to scan from WIA-
compliant applications.
1 Place the original that you wish to scan on the document glass/
RSPF.
For the procedure for placing the original, see "NORMAL COPYING" (p.17).
2 After starting WIA-compliant application, click the "File" menu
and select a menu to scan.
3 Select the paper source and picture type, and click the
"Preview" button.
The preview image will appear.
If you placed the original on the document
glass, select "Flatbed" for the "Paper
source".
If you placed the original in the RSPF, select
"Document Feeder" for the "Paper source"
and specify the original size in "Page size".
4 Click the "Scan" button.
Scanning begins and the image is acquired into Paint.
Use "Save" in your application to specify a file name and folder for the
scanned image, and save the image.
To cancel a scanning job after clicking the "Scan" button, click the "Cancel"
button.
The method for accessing the menu to select the scanner depends
upon the application. For more information, refer to the manual or the
help file of your application.
• If you select "Document Feeder" for the "Paper source" and click
the "Preview" button, the top original in the RSPF is previewed.
The previewed original is sent to the original exit area, so you will
need to return it to the RSPF before starting the scanning job.
• In Windows XP, you can view Help for a setting. Click the
button in the upper right-hand corner of the window and then click
the setting.