Vehicle installation – Sirius Satellite Radio SDSV6V1 User Manual

Page 34

Advertising
background image

34

• Sedan/Coupe With Antenna Placed at the Front of the Roof:

1 . Feed the antenna cable from the antenna underneath the rubber

molding around the windshield . Use a blunt plastic putty knife or
similar blunt tool to lift the rubber molding around the windshield
and tuck the antenna cable underneath the molding . Route the
antenna cable around and down the windshield to the lowest point .

2 . At the lowest corner of the windshield, route the cable out of the

windshield molding and into the rubber weather stripping around
the door opening . Lift the weather stripping from the opening and
tuck the cable inside it, then replace the weather stripping . Run
the cable inside of the weather stripping to the bottom of the door
opening .

3 . Pull the cable out of the weather stripping at the bottom of the

door opening and route it under the carpet toward the dashboard .
Coil any excess cable in a hidden location, such as under the carpet,
keeping it away from any vehicle pedals or controls . Secure the
excess cable with wire ties .

4 . Bring the end of the cable

out at the PowerConnect
Vehicle Dock location .
Leave yourself enough
cable so you can easily
connect it to the antenna
connector of the dock .

5 . Continue with “Step 5:

Connect the Magnetic
Mount Antenna and PowerConnect Power Adapter” on page 39 .

Vehicle Installation

Advertising