Sirius Satellite Radio SDSV6V1 - Manual (Page 42)

42
4 Power on your Stratus 6 by pressing the Power
button .
5 Be sure the vehicle is outside and the antenna has a
clear view of the sky . Verify that you are receiving
the SIRIUS signal . There should at least be one bar
on the upper right corner of the main display screen
that denotes antenna signal strength . You can also
press and hold menu and then press to scroll to and highlight Signal .
Press the Select button . The
Satellite and Terrestrial bars show
the strength of the signal being
received . If the signal reception is
good, press and hold menu to return
to the main display screen .
6 Ensure that the Stratus 6 is tuned to channel 184 . Upon power up,
the Stratus 6 should tune to channel 184 by default, when it’s not yet
activated . If it’s not on channel 184, refer to “Listening to Satellite
Radio” on page 62 to learn about how to tune a channel .
7 Turn on your vehicle’s stereo system . Set it to play input from the
auxiliary input source .
8 You should hear SIRIUS channel 184 through your vehicle’s stereo
system . You are now ready to activate your Stratus 6 .
9 The audio level output of the Stratus 6 can be increased or decreased
as necessary to match the audio levels of other sources in your vehicle .
Refer to “Audio Level” on page 84 .
jump
sel
S i g n a l
SAT - +
TER - +
Vehicle Installation