Sat - + ter, Option 3: power connect installation instructions – Sirius Satellite Radio SDSV6V1 User Manual

Page 47

Advertising
background image

47

Option 3: PowerConnect Installation Instructions

1 Insert your Stratus 6 into the

dock, aligning the radio against
the rear of the dock so that the
rails on the dock fit into the
mounting slots in the back of
the radio .

2 Power on Stratus 6 radio by

pressing the Power button .

3 Be sure the vehicle is outside

and the antenna has a clear
view of the sky . Verify that you
are receiving the SIRIUS signal . There should at
least be one bar on the upper right corner of the
main display screen that denotes antenna signal
strength . You can also press and hold menu and
then press

to scroll to and highlight Signal .

Press the Select button . The Satellite and
Terrestrial bars show the strength of the signal
being received . If the signal
reception is good, press and
hold menu to return to the main
display screen . You are ready to
make the audio connection .

jump

sel

S i g n a l

SAT - +
TER - +

jump

menu

sel

Advertising