Sanyo STB1220C1 - Manual (Page 42)

38
(3) Remove the following screws. (Fig. 5)
➀ 2 screws holding the component box
➁ 2 screws holding the ventilator knob
➂ 1 screw holding the power supply cord
(4) Disconnect the wiring connectors and lead wires
connecting the following electrical parts in the
electrical component box.(Fig. 6)
• Compressor motor capacitor
• Fan motor capacitor
9-4. Removing Electric Heater
(1) Remove the 6 screws holding the top cover plate.
(Fig. 7)
(2) Remove the 5 screws holding the blade Ass´y.
(Fig. 8)
Fig. 8
Blade Ass´y
Fig. 7
Top cover plate
Fig. 6
Fan motor capacitor
Compressor motor
capacitor
Fig. 5
➁
➀
➂