Samsung Digimax S800 - Manual (Page 19)

ŝ18Ş
Using the camera buttons to set the camera ZOOM W / T button
ƈ The recording mode function can be set up by using the camera buttons.
ƃ Used for turning the camera’s power on / off.
ƃ If there is no operation during the specified time,
the camera's power will be turned off
automatically to save battery life.
Refer to page 56 for more information about the
auto power off function.
POWER button
ƃ Used for taking an image or recording voice in
the RECORDING mode.
ƃ In MOVIE CLIP mode :
Pressing the shutter button down fully starts the
process for recording a movie clip. Press the
shutter button once and the movie clip is
recorded for as long as the available recording
time in the memory allows. If you wish to stop recording, press the shutter button
again.
ƃ In STILL IMAGE mode
Pressing the shutter button down halfway activates the autofocus and checks
the condition of the flash. Pressing the shutter button down fully takes and stores
the image. If you select voice memo recording, the recording will start after the
camera has finished storing the image data.
Shutter button
ƃ If the menu is not displayed, this button works
as the OPTICAL ZOOM or DIGITAL ZOOM
button.
ƃ This camera has a 3X optical zoom and a 10X digital zoom function.
Using both will offer a total zoom ratio of 30X.
ƃ TELE Zoom
Optical zoom TELE : Pressing the ZOOM T button. This will zoom into the
subject i.e. the subject will appear nearer.
Digital zoom TELE : When the maximum (3X) optical zoom is selected,
pressing the ZOOM T button activates the digital zoom
software. Releasing ZOOM T button stops the digital
zooming at the required setting. Once the maximum
digital zoom (10X) is achieved, pressing the ZOOM T
button will have no effect.
[ WIDE zoom ] [ TELE zoom ] [ Digital zoom 10X ]
Pressing
the ZOOM
T button
Pressing
the ZOOM
T button