Samsung Digimax S800 - Manual (Page 27)

ŝ26Ş
Special Effect : Preset focus frames
Capture:Shutter Edit:+/-
Capture:Shutter Edit:+/-
Capture:Shutter Move:
ƃ Moving and changing the focus frame
You can change the focus frame after selecting a Range menu.
1. Point the camera towards the subject and compose the image by using the
LCD monitor.
2. Press the + / - button.
3. The colour of focus frame turns white. Press the Up / Down / Left / Right
button to move the focus frame position.
4. To select the focus frame position, press the + / - button again and you can
take a picture.
[The frame is activated]
Capture:Shutter Move:
[After changing the frame position]
Pressing the + / - button
Pressing the + / - button
Pressing the
Up / Down / Left /
Right button
ƈ You can make the subject stand out from its
surroundings. The subject will be sharp and in focus
while making the rest out of focus.
1. Press the E button in any recording mode
(except for MOVIE CLIP and AUTO mode).
2. Select the ( ) menu tab by pressing the Left /
Right button.
3. Select a desired sub menu by pressing the Up /
Down button and press the OK button.
4. The preset focus frame will appear.
Press the shutter button to capture an image
[Range 1] [Range 2] [Range 3] [Range 4]
HighLight
HighLight HighLight HighLight HighLight
Capture:Shutter Edit:+/-