Sunlife Enterprises SUNLINE DM180 - Manual (Page 23)

356214-XIM-A-0108
Johnson Controls Unitary Products 23
NOTE: All entry holes should be field sealed to prevent rain
water entry into the building.
FIGURE 13 - FRONT VIEW DIMENSIONS (15, 20 & 25 TON)
UTILITIES ENTRY DATA
HOLE OPENING SIZE (DIA.) USED FOR
A
29 / 1-1/8” KO
Control Wiring
Side
19 / 3/4” NPS (Fem.) Bottom
B
92 / 3-5/8” KO
Power Wiring
Side
76 / 3” NPS (Fem.) Bottom
C 60 / 2-3/8” KO Gas Piping (Front) 1
1. One-inch gas piping NPT required.
D 43 / 1-11/16” Hole Gas Piping (Bottom) 2
2. Opening in the bottom of the unit can be located by the slice in the
insulation.
RETURN
AIR
SUPPLY
AIR
BOTTOM SUPPLY
AND RETURN
AIR OPENINGS
(See Note)
(B)
POWER WIRING
ENTRY
(A)
CONTROL WIRING
ENTRY
NOTE:
For curb mounted units, refer to the curb hanger
dimensions of the curb for the proper size of the
supply and return air duct connections.
UNIT BASE WITH RAILS
Shown separately to illustrate
Bottom Duct openings, Power
and Gas Piping Connection
locations
12-1/2"
9-1/4"
8-1/8"
9-3/4"
3-3/4"
(B)
POWER WIRING
ENTRY
(A)
CONTROL WIRING
ENTRY
92"
CONDENSER
COILS
COIL
GUARD
COMPRESSOR
ACCESS
ECONOMIZER / MOTORIZED DAM PER,
FIXED OUTDOOR INTAKE AIR AND
POWER EXHAUST RAIN HOODS
(See detail "Y")
FIELD-SUPPLIED
DISCONNECT SWITCH
LOCATION
BLOWER
ACCESS
BLOWER MOTOR
ACCESS
BLOWER
COMPARTMENT
ACCESS
(Auxiliary)
DOT PLUG
(For pressure
Drop Reading)
FRONT
VIEW
CONTROL BOX
ACCESS
21"
5"
9-3/4"
11-1/2"
2-3/4" 21-1/2"
33"
35"
5-7/8"
46-5/8"
7-1/8"
6-3/8"
VENT AIR
OUTLET
HOODS
COMBUSTION
AIR INLET
HOOD
GAS HEAT
ACCESS
(C)
GAS SUPPLY
ENTRY
46-5/8"
11-1/8"
(D)
GAS SUPPLY
ENTRY
12-1/4"(15 T
ON)
35-1/4”
(20, 25
TON)
125-1/4"(15 T
ON)
136-1/4”
(20, 25
TON)
)
48-5/8"(15 TON)
52-5/8" (20, 25 TON)
ELECTRIC/
All dimensions are in inches. They are
subject to change without notice. Certified
dimensions will be provided upon request.