Sunlife Enterprises SUNLINE DM180 - Manual (Page 5)

356214-XIM-A-0108
Johnson Controls Unitary Products 5
RENEWAL PARTS
Contact your local York
®
Parts Distribution Center for
authorized replacement parts.
APPROVALS
Design certified by CSA as follows:
• For use as a cooling unit only with or without
optional electric heat.
• For use as a forced air furnace with cooling unit
• For outdoor installation only.
• For installation on combustible material.
• For use with natural gas or propane gas.
The installer should pay particular attention to the
words: NOTE, CAUTION and WARNING. Notes are
intended to clarify or make the installation easier. Cau-
tions are given to prevent equipment damage. Warn-
ings are given to alert installer that personal injury and/
or equipment damage may result if installation proce-
dure is not handled properly.
THIS PRODUCT MUST BE INSTALLED IN
STRICT COMPLIANCE WITH THE
ENCLOSED INSTALLATION INSTRUC-
TIONS AND ANY APPLICABLE LOCAL,
STATE, AND NATIONAL CODES INCLUD-
ING, BUT NOT LIMITED TO, BUILDING,
ELECTRICAL, AND MECHANICAL CODES.
IMPROPER INSTALLATION MAY CREATE A
CONDITION WHERE THE OPERATION OF
THE PRODUCT COULD CAUSE PERSONAL
INJURY OR PROPERTY DAMAGE.