Samsung SCX-6322DN - Manual (Page 13)

1 .3
<Introduction>
Control panel overview
1 Keyboard : Used to enter characters. Used to store frequently
dialed fax number and dial them with a touch of the buttons. (See
page 2.3.)
12 Back : Sends you back to the upper menu level.
2 Address Book : Allows you to store frequently used fax numbers in
memory or search for stored fax numbers or email addresses. Also
allows you to print an Address Book/Phone Book list. (See page
8.5.)
13 Status : Shows the status of your machine. See page 1.4.
3 Resolution : Adjusts the document resolution for the current fax job. 14 Darkness : Adjusts the document darkness for the current copy job.
4 Redial/Pause : In Standby mode, redials the last number, or in Edit
mode, inserts a pause into a fax number.
15 Original Type : Selects the document type for the current copy job.
5 Fax : Activates Fax mode. 16 Reduce/Enlarge : Makes a copy smaller or larger than the original.
6 Copy : Activates Copy mode. 17 Duplex : Allows you to print documents on both sides of the paper.
7 Scan/Email : Activates Scan mode. 18 Toner Save : Allows you to save on toner by using less toner in
printing.
8 Display : Shows the current status and prompts during an operation. 19 Number keypad : dials a number or enters alphanumeric characters.
9 Menu : Enters Menu mode and scrolls through the available menus. 20 On Hook Dial : Engages the telephone line.
10 Scroll buttons: Scroll through the options available in the selected
menu, and increase or decrease values.
21 Stop/Clear : Stops an operation at any time. In Standby mode,
clears/cancels the copy options, such as the darkness, the
document type setting, the copy size, and the number of copies.
11 OK : Confirms the selection on the screen. 22 Start : Starts a job.