Sony DHC-MD5 - Manual (Page 17)

DHCMD5 3-858-048-11 (1)EN
17
Programming the CD
tracks
–– Programme Play
You can make a programme of up to
32 tracks from all the CDs in the order you
want them to be played.
6
To programme additional tracks,
repeat steps 3 to 5.
Skip step 3 if you select a track from
the same disc.
7
Press ·.
All the tracks play in the order you
selected.
To check the total number of the
programmed tracks
Press DISPLAY in the stop mode.
“Step” appears, followed by the total number
of the programmed tracks.
To
Cancel
Programme
Play
Add a track to
the programme
(in stop mode)
Clear the entire
programme
Press
π, then PLAY MODE
repeatedly so that
“PROGRAM” disappears.
1 Select the disc tray with
DISC 1 – 3 buttons.
2 Select the track by turning
MULTI JOG.
3 Press ENTER/YES.
π once in the stop mode.
Tips
• To programme the entire CD as one step of the
programme, skip step 4.
• The programme you made remains after the
Programme Play has finished. To play the same
programme again, press ·. When you make a
recording with the Hit Parade feature, the
programme is erased.
• The total playing time is not displayed when you
select a track whose number is 21 or more or, the
total program time exceeds 100 minutes.
1
Press FUNCTION repeatedly until
“CD” appears in the display, then
place a CD on the disc tray.
2
Press PLAY MODE repeatedly until
“PROGRAM” appears.
3
Press one of the DISC 1 – 3 buttons
to select a CD.
4
Turn MULTI JOG until the desired
track appears in the display.
5
Press ENTER/YES.
The track is programmed. The last
programmed track appears, followed by
the total playing time.
Selected track Playing time
1 2
7
5 4
3 π
∏ · π §
® ∏ · π §
º ‚