Sony DHC-MD5 - Manual (Page 27)

DHCMD5 3-858-048-11.EN (1)
27
1
ERASE
2 3
1 2 3
4
Erasing recordings
— Erase Function
The MD system lets you erase unwanted
sound quickly and easily. The three options
to erase recordings are:
• Erasing a single track.
• Erasing all tracks.
• Erasing a portion of a track.
Note
When “SHUFFLE” or “PROGRAM” appears in the
display, press PLAY MODE repeatedly until the
indication disappears.
Erasing a single track
You can erase a track simply by specifying its
track number. When you erase a track, the
total number of tracks on the MD decreases
by one and all the tracks following the erased
one are renumbered.
Example: Erasing track B.
Track
number Erase track B
Original A B C D
tracks
A C D
1
Turn MULTI JOG until the track
number you want appears.
2
Press EDIT/NO, then turn MULTI
JOG until “Erase ?” appears.
3
Press ENTER/YES.
“Erase ??” appears.
If you want to cancel the Erase Function
at this time, press π.
4
Press ENTER/YES again to erase
the track.
“Complete” appears for a few seconds
and the selected track and title are
erased.
Note
“Erase!! ?” appears when the track was recorded or
edited on another deck and is record protected. To
erase the track, press ENTER/YES while “Erase !!?”
is displayed.
The track number you want.
continued
2 3,4 1,2
π
∏ · π §
® ∏ · π §
º ‚