Sony DHC-MD5 - Manual (Page 23)

DHCMD5 3-858-048-11.EN (1)
23
5
Repeat steps 3 and 4 to programme
other tracks.
6
Press ·.
Playback starts in the order you selected.
To
Cancel
Programme
Play
Add a track to
the programme
(in stop mode)
Erase the
programme
Press
π, then PLAY MODE
repeatedly until “PROGRAM”
disappears.
1 Select the track by turning
MULTI JOG.
2 Press ENTER/YES.
π in stop mode.
Tip
The programme you made remains after the
Programme Play has finished. To play the same
programme again, press ·.
MDs (Mini Disc) let you digitally record and
play back music with high quality sound that
compares with the sound of CDs. Another
feature of MDs is track marking. The track
marking feature lets you quickly locate a
specific point or easily edit the recorded
tracks. However, depending on the source
you record, the recording method varies.
Also, the way the track numbers are recorded
differs depending on the source.
When the source you record from is:
• This system’s CD player
– The digital signal from the CD is recorded
as it is (digital recording*).
– Track numbers are automatically marked
as on the original CD.
• Other digital components
(e.g., a DAT deck)
– The digital signal is converted to an analog
signal once, then re-converted to a digital
signal and recorded** (analog recording).
– A track number is marked at the beginning
of a recording, but when you turn on the
Level Sync function (see page 26), track
numbers are automatically marked in sync
with the level of the input signal.
Before you start
recording
continued