Southbend X560DD S536A - Manual (Page 18)

I NSTALLATION 500 S ERIES R ESTAURANT R ANGES
P AGE 18 OF 48 O WNER ’ S M ANUAL 1188716 (09/07)
10. Using the cable clamp (item “D”), adjust the restraining device extended length to prevent over-bending or
kinking of the appliance connector.
Figure 6
Installation of Restraint
H
F
I
G
E
D
A
B
C
Be sure all controls are turned off prior to disconnecting. After reconnecting, be sure all controls are turned off and all
pilots are lit.
NOTICE
Adequate means must be provided to limit the movement of the appliance without depending on the connector
and the quick-disconnect device or its associated piping to limit the appliance movement.
The restraining means should be attached to a frame member on the back of the range.