SpectraLink SVP100 - Manual (Page 25)

SpectraLink Corporation Installation, Configuration, and Administration
NetLink SVP Server (within IP environments)
PN: 72-0178-01-F.doc Page 25
• If any of the Traffic Class settings are set at any value ( Value Y ) other
than Default , that setting ( Value Y ) will override the Administration
setting.
Administration
Traffic Class Default Value X
Default 4 X
WT (In call)
Priority High
Value Y Y Y
Default 0 X
WT (Standby)
Priority Med
Value Y Y Y
Default 4 X
RTP
Priority High
Value Y Y Y
Default 0 X
PBX
Priority Med
Value Y Y Y
Default 0 X
Inter-SVP2
Priority Med
Value Y Y Y
Default 0 X
Administration
Priority Low
Value Y Y Y
 Note: Default DSCP settings will mark traffic for Best Effort handling
under normal circumstances. Please consider changing these values based
on the recommended QoS settings from your network hardware
manufacturer to achieve prioritization for your voice traffic..