SpectraLink SVP100 - Manual (Page 28)

SpectraLink Corporation Installation, Configuration, and Administration
NetLink SVP Server (within IP environments)
PN: 72-0178-01-F.doc Page 28
6. Software Maintenance
The NetLink SVP Server uses proprietary software programs written and maintained
by SpectraLink Corporation. The software versions that are running on the system
components can be displayed via the System Status screen.
You may obtain information about software updates from SpectraLink or its
authorized dealer.
At startup the NetLink SVP Server uses TFTP to check the software version it is
running against the version in the TFTP location. If there is a discrepancy, the
NetLink SVP Server will download the version in the TFTP location. See the
Configuration and Administration document for your vendor’s IP system for more
information about using TFTP.
Software Updates
Lock the NetLink SVP Server in the SVP-II Configuration screen prior to updating
the software. In multiple SVP Server systems, all SVP Servers must be locked and
upgraded at the same time.
Downloads for the NetLink SVP Server are available from Available from
http://www.spectralink.com/softwareUpdates .
After software updates are obtained from SpectraLink, they must be transferred to
the TFTP location in the LAN to update the code used by the NetLink SVP
Server(s).
 Note that locking the NetLink SVP Server will prevent new calls from
starting. All calls in progress will be terminated when the NetLink SVP
Server is reset.