SpectraLink SVP100 - Manual (Page 30)

SpectraLink Corporation Installation, Configuration, and Administration
NetLink SVP Server (within IP environments)
PN: 72-0178-01-F.doc Page 30
7.1 Error Status
The Error Status screen displays any alarms that indicate some system malfunction.
Some of these alarms are easily remedied and others require a call to SpectraLink’s
Customer Support Department.
From the
System Status Menu, select Error Status . The screen displays active alarms
on the NetLink SVP Server.
The following table displays the list of alarms and a description of the action to take
to eliminate the alarm.
Alarm Text Action
Maximum payload usage reached Reduce usage, clear alarm
Maximum telephone usage reached Reduce usage, clear alarm
Maximum access point usage reached Reduce usage, clear alarm
Maximum call usage reached Reduce usage, clear alarm
SRP audio delayed Reduce usage, clear alarm
SRP audio lost Reduce usage, clear alarm
No IP address Configure an IP address
Press C to clear all clearable alarms.