Sony SRP-X500P - Manual (Page 16)

SRP-X500P RS-232C Interface Manual
• LINE OUTPUT MUTING (3rd byte)
Shows the muting status of the LINE OUTPUT channels in the form of 8 bits of data.
The bit is 0 for a channel which is not turned off (
“ Muting off”) and 1 for a channel which is
turned off ( “ Muting on”).
MSB LSB
bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
0 1 0 0 CH4 CH3 CH 2 CH 1
• MASTER MUTING (4th byte)
Shows the muting setting of the master volume.
The parameter and the muting setting are as shown in the following table.
MUTING
Muting off 0x30(‘0’)
Muting on 0x31(‘1’)
• REMOTE MUTING (5th byte)
Shows the muting status of the REMOTE 1-6 faders in the form of 8 bits of data.
The bit is 0 for a channel which is not turned off (
“ Muting off”) and 1 for a channel which is
turned off ( “ Muting on”).
MSB LSB
bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
0 1 CH 6 CH 5 CH4 CH3 CH 2 CH 1
Example
When the muting status of each channel is as follows:
MIC 1/WL 1 INPUT
: Muting on
MIC 2/WL 2 INPUT : Muting off
MIC 3 INPUT : Muting on
MIC 4 INPUT : Muting off
LINE INPUT : Muting on
AV/RGB INPUT : Muting off
SPEAKER OUTPUT 1 : Muting on
SPEAKER OUTPUT 2 : Muting off
SPEAKER OUTPUT 3 : Muting on
SPEAKER OUTPUT 4 : Muting off
LINE OUTPUT 1 : Muting on
LINE OUTPUT 2 : Muting off
LINE OUTPUT 3 : Muting on
LINE OUTPUT 4 : Muting off
MASTER : Muting on
REMOTE 1 : Muting on
REMOTE 2 : Muting off
REMOTE 3 : Muting on
REMOTE 4 : Muting off
REMOTE 5 : Muting on
REMOTE 6 : Muting off
0x41 0x55 0x45 0x45 0x31 0x55 0x0D
(‘A U E E 1 U CR’)
Page 16/43