Sony SRP-X500P - Manual (Page 25)

SRP-X500P RS-232C Interface Manual
Parameters
The parameter consists of 108 bytes of data, as shown in the following table.
Byte (when
acquiring all
items at one time) Parameter Specified value
(when acquiring
single item)
Parameter byte(s)
(when acquiring
single item)
1st PROJECTOR PROTOCOL SWITCH 0x51 (‘Q’) 1
2nd SYSTEM TYPE SWITCH 0x52 (‘R’) 1
3rd-8th INPUT VOLUME 0x53 (‘S’) 6
9th MASTER VOLUME LEVEL 0x54 (‘T’) 1
10th REMOTE 1 LEVEL 0x55 (‘U’) 1
11th REMOTE 2 LEVEL 0x56 (‘V’) 1
12th REMOTE 3 LEVEL 0x57 (‘W’) 1
13th REMOTE 4 LEVEL 0x58 (‘X’) 1
14th REMOTE 5 LEVEL 0x59 (‘Y’) 1
15th REMOTE 6 LEVEL 0x5A (‘Z’) 1
16th-21st INPUT LEVEL 0x5B (‘[‘] 6
22nd-29th OUTPUT LEVEL 0x5C (‘\’) 8
30th INPUT MUTING 0x5D (‘]’) 1
31st, 32nd OUTPUT MUTING 0x5E (‘^’) 2
33rd MASTER MUTING 0x5F (‘_’) 1
34th REMOTE MUTING 0x60 (‘`’) 1
35th (RESERVED)
36th RF/AF INDICATOR 0x61 (‘a’) 1
37th WL INDICATOR 0x62 (‘b’) 1
38th +48V SWITCH 0x63 (‘c’) 1
39th MIC 1 TRIM 0x64 (‘d’) 1
40th MIC 2 TRIM 0x65 (‘e’) 1
41st MIC 3 TRIM 0x66 (‘f’) 1
42nd MIC 4 TRIM 0x67 (‘g’) 1
43rd LINE TRIM 0x68 (‘h’) 1
44th-48th AV/RGB TRIM 0x69 (‘i’) 5
49th REF INDICATOR 0x6A (‘j’) 1
50th-53rd FR 0x6B (‘k’) 4
54th,55th FR SETUP STATUS 0x6C (‘l’) 2
56th AV/RGB INPUT SELECT 0x6D (‘m’) 1
57th, 58th SPEAKER OUTPUT LEVEL 0x6E (‘n’) 2
59th IR OUTPUT MODE INDICATOR 0x6F (‘o’) 1
60th-75th LEVEL METER 0x70 (‘p’) 16
76th PROTECTION 0x71 (‘q’) 1
77th CLIP INDICATOR 0x72 (‘r’) 1
78th, 79th TEMPERATURE 0x73 (‘s’) 2
80th PROJECTOR ON/STANDBY
INDICATOR
0x74 (‘t’) 1
81st, 82nd (RESERVED)
83rd EMG MUTING 0x77 (‘w’) 1
84th SCENE No. 0x78 (‘x’) 1
85th-94th PARALLEL INPUT 0x79 (‘y’) 10
95th, 96th PARALLEL OUTPUT 0x7A (‘z’) 2
97th FAN MOTOR 0x7B (‘{‘} 1
98th MASTER VOLUME CONTROL 0x7C (‘|’) 1
99th-108th GAIN REDUCTION 0x7D (‘}’) 10
The parameters returned have the following meanings.
Page 25/43