Smart Technologies Smart Board Software 9.7 - Manual (Page 20)

16 Installing Notebook Gallery Content
Sharing Gallery Content
When you set up a system where all Notebook software users share the Gallery content located
on a network server, all users see the shared Gallery content as "their own." If any user in the
system removes their SMART Board software, they will also remove the shared content from the
network server. To prevent this from occurring, SMART recommends the following process:
1. Start an interactive installation of SMART Board software on the first computer using the CD-
ROM, or a copy of the CD on a network server (see page 2).
2. When the SMART Essentials for Educators dialog box opens, select the galleries that you
want to install (see page 11).
3. Click the Browse button, and select or create the network folder where you want the Gallery
folders and files installed.
4. Click OK.
The installer copies the selected content to the network folder.
5. Set the shared network folder’s permisions to read-only.
1. Silently install SMART Board software on each computer using the commands on page 3.
2. Register the shared Gallery with Notebook software on each computer using a command as
follows:
"Path to .exe\Gallery Setup.exe" --register -remote /destination
"Path to shared folder" /configuration "path"
To install SMART Board software and place Gallery content on a network server
To silently install SMART Board software, registered with shared Gallery content