Smart Technologies Smart Board Software 9.7 - Manual (Page 27)

Installing Service Packs 23
The Service Pack Installation Program
You can also download the BoardXYServicePackSPx.exe (where XY is the SMART Board
software version number and x is the service pack number) installation program from the SMART
website. You can run the program from the website, or you can download the
BoardXYServicePackSPx.exe file to your computer or to a network drive.
You can use the following command to perform a default service pack installation:
1. Click Start > Run and type CMD.
A DOS window opens.
2. Type the following command line (including quotation marks):
"Path to .exe\BoardXYServicePackSPx.exe"
where XY is the SMART Board software version number and x is the service pack number.
3. Press Enter.
You can add the silent switch /s to the above command to perform a silent service pack
installation:
1. Click Start > Run and type CMD.
2. A DOS window opens.
3. Type the following command line (including quotation marks):
"Path to .exe\BoardXYServicePackSPx.exe" /s
where XY is the SMART Board software version number and x is the service pack number.
4. Press Enter.
NOTES
• You can copy the BoardXYServicePackSPx.exe file to any accessible network server and
run the command from that location.
• Don’t use any other options.
• You can’t use a command line to remove a service pack. To remove a service pack, you must
remove SMART Board software, using Windows Control Panel or a command line (see
page 16), and then reinstall the original software.
To perform a default installation using the installation program
To perform a silent installation using the installation program