Sharp XG-PH50X - Manual (Page 40)

-36
Connecting to a Monitor That Has an RGB Input Terminal
You can display computer images on a monitor using the RGB cables.
Note
• RGB signals and component signals input from the INPUT 1 or INPUT 2 terminals can be output to the
monitor.
• For inputting video signals from the INPUT 1 terminal, another RGB cable (commercially available) is
required.
Connecting to an Amplifier or Other Audio Equipment
Audio signals input from equipment connected to each audio input terminal of the projector
can be output to audio equipment.
Note
• ø3.5 mm stereo minijack to RCA audio cable (commercially available) is required for audio input.
• When turning off the power in the case of connecting an amplifier or other audio equipment, first turn off
the power of the amplifier and then turn off the power of the projector.
• By using external audio components, the volume can be amplified for better sound.
• For details on Variable Audio Output (VAO) and Fixed Audio Output (FAO), see page
72 .
Monitor Side view
To RGB output
terminal
Computer
To RGB input
terminal
To INPUT 1
terminal
RGB cable (supplied or
commercially available)
RGB cable (supplied
or commercially
available)
To OUTPUT
(FOR INPUT 1, 2) terminal
Amplifier Side view
To audio input
terminals
ø3.5 mm stereo minijack to RCA audio cable
(commercially available)
To AUDIO OUTPUT
(1 – 5) terminal