Sharp XG-PH50X - Manual (Page 47)

Basic Operation
-43
Horizontal Keystone Correction
(Adjustment with
\ / | )
Vertical Keystone Correction
(Adjustment with
' / " )
H & V KEYSTONE
1
Press on the projector or
on the remote control re-
peatedly until “H & V KEY-
STONE” is displayed.
• When the correction has already been
made with “GEOMETRIC ADJUST-
MENT”, the confirmation message for
resetting the correction before “H & V
KEYSTONE” is displayed.
2
Press ', ", \ or | to move the
position for the horizontal or
vertical axes.
3
Press or to set the posi-
tion.
• When “H & V KEYSTONE” is set to the
values other than “0”, “IMAGE
RESIZING” is displayed.
▼On-screen Display