Senatek HELLODEVICE LITE SERIES LS100 - Manual (Page 36)

36
listening_port = listening TCP port
dest_ip = destination IP address
dest_port = destination TCP port
cyclic_connection_interval = cyclic connection interval in minutes
inactivity_timeout = inactivity timeout in seconds.
Parameter definitions for TCP server and client mode configuration are the same with TCP server
mode and TCP client mode parameters.
Figure 4-6 shows TCP server/client mode setting example:
> set host tcpsc 6001 192.168.1.100 7001 10 300
OK
>
Figure 4-6 TCP server/client mode setting