3 server chassis features – SUPER MICRO Computer 6015TC-10G User Manual

Page 13

Advertising
background image

Chapter 1: Introduction

1-5

1-3 Server Chassis Features

The following is a general outline of the main features of the SC808T-780 1U chas-

sis. Details on the chassis can be found in Chapter 6.

System Power

When confi gured as a SuperServer 6015TC-T/6015TC-10G, the SC808T-780 in-

cludes a single 780W cold-swap power supply, which provides the power to both

serverboards housed in the chassis.

SATA Subsystem

The SC808T-780 chassis was designed to support four SATA hard drives, which

are hot-swappable units.

Control Panel

The SC808T-780 features two independant control panels associated with each

serverboard in the chassis. Each control panel has LEDs to indicate power on, net-

work activity, hard disk drive activity and system overheat conditions. Each control

panel also includes a main power button and a system reset button.

Rear I/O Panel

The SC808T-780 is a 1U rackmount chassis. Its I/O panel provides a slots for two

low-profi le PCI-E x16 expansion cards, two COM ports, four USB ports, two VGA

ports and four Gb Ethernet ports. The 6015TC-10G also provides two 10 Gigabit

Ethernet ports. See Chapter 6 for details.

Cooling System

The SC808T-780 chassis has an innovative cooling design that features two sets

of triple (for a total of six) 4-cm high-performance fans. A fan speed control setting

in BIOS allows fan speed to be determined by system temperature.

Advertising
This manual is related to the following products: