SUPER MICRO Computer 6015TC-10G - Manual (Page 99)

C-1
Appendix C: System Specifi cations
Appendix C
System Specifi cations
Note: unless noted specifi cations apply to a complete system (both server-
boards).
Processors
Four Intel® Xeon® 5400/5300/5200/5100 Series processors in LGA771 sockets
Note: please refer to our website for details on supported processors.
Chipset
Intel 5100/ICH9R
BIOS
Phoenix BIOS in 16 Mb Flash EEPROM (each serverboard)
Memory Capacity
Twelve (12) DIMM slots to support a maximum up to 96 GB of registered ECC
DDR2-667/533 SDRAM
Note: interleaved memory requires DIMMs to be installed in pairs - refer to Section 5-6 for details.
Serial ATA Controller
Intel ICH9R on-chip controller to support four 3 Gb/s Serial ATA (RAID 0, 1)
SATA Drive Bays
Four (4) hot-swap drive bays to house four (4) standard SATA drives
PCI Expansion
Two (2) low-profi le PCI-Express x16 slots (with pre-installed riser cards)
Serverboard
6015TC-T: X7DCT
6015TC-10G: X7DCT-10G
Dimensions (both): 6.5 x 16.4 in (165 x 417 mm)
Chassis
SC808T-780 (1U Rackmount)
Dimensions: (WxHxD) 17.2 x 1.7 x 27.75 in. (437 x 43 x 705 mm)