SUPER MICRO Computer 6015TC-10G - Manual (Page 68)

7-6
S UPER S ERVER 6015TC-T/6015TC-10G User's Manual
Disabled, the item-SATA AHCI Enable will be available.) The options are Enabled
and Disabled.
ICH RAID Code Base
Select to enable which SATA RAID fi rmware to confi gure. The options are Intel
and Adaptec.
DFOROM (Roboson) Support
Select Enabled to enable DFOROM (Roboson) support. The options are Enabled
and Disabled.
SATA AHCI
Select Enable to enable the function of Serial ATA Advanced Host Interface. (Use
caution when enabling this function. This feature is for advanced programmers only.)
The options are Enabled and Disabled.
System Memory
This display informs you how much system memory is recognized as being present
in the system.
Extended Memory
This display informs you how much extended memory is recognized as being pres-
ent in the system.
7-4 Advanced Setup
Choose Advanced from the Phoenix BIOS Setup Utility main menu with the ar-
row keys. You should see the following display. The items with a triangle beside
them have sub menus that can be accessed by highlighting the item and pressing
<Enter>.
XBoot Features
Access the submenu to make changes to the following settings.
QuickBoot Mode
If enabled, this feature will speed up the POST (Power On Self Test) routine by
skipping certain tests after the computer is turned on. The settings are Enabled
and Disabled. If Disabled, the POST routine will run at normal speed.