Sony PCLK-MN10A - Manual (Page 54)

54
Recording to an MD
Recording from a CD to an MD
Before you begin
• You cannot record to a write-protected MD. Slide the write-protect
tab on the MD to enable writing.
• Before you begin the recording, double-click the disc icons of all the
MDs to be recorded to. This will cause the system to upload TOC
information necessary for the recording operation.
• Click on the Recording Mode display (page 35) to select the
recording mode.
z Tip
You can also record from a PC-CD to an MD using the same procedure
described below.
Synchro recording from a CD to an MD
1
Open the Rec window (page 34).
2
Click the Synchro button (page 36).
3
(Only for certain system components) Click the Synchro speed
change button (page 35).
4
Click the destination MD in the Function Tree display in the MD
window.
The names of the tracks on the MD appear in the Track Name
display in the MD window.
If the track names do not appear, double-click the destination MD.
5
Click the source CD in the Function Tree display in the CD
window.
The names of the tracks on the CD appear in the Track Name
display in the CD window.
If the track names do not appear, double-click the source CD.