Sony PCLK-MN10A - Manual (Page 55)

Performing MD operations
55
6
Drag the number of the track you want to record from the Track
Name display in the CD window and drop it into the Track Name
or Disk Information display in the MD window.
The dropped track appears in orange in the Track Name display in
the MD window, which indicates that it is a track to be recorded.
You can register a track to be recorded by selecting the track and
pressing the Add button.
Repeat the procedure from step 4 to specify other tracks for
recording. Two or more tracks can be selected at the same time by
clicking the desired track numbers while holding down the CTRL
key.
To specify all tracks on a CD, drag and drop the CD disc icon (for
example, CD1) from the Disc Information display into the MD
window.
Repeat the procedure from step 4 to record from more than one
CD.
Note
If the tracks that you have dragged and dropped cannot be contained on a
single MD, the dragging operation is canceled and the message
“Insufficient free recording space” appears.
7
Click the REC button in the Rec window.
Recording from the CD to the MD starts.
To stop recording, click
in the MD window.
Deselecting tracks that have been selected for recording
To deselect a track that has been selected for recording, drag the track
number from the Track Name display in the MD window and drop it
into
.
Alternatively, you may click the track, and then click the Undo button
to cancel the track selection.
To cancel all selected tracks, click
in the MD window.
(continued)