Sherwood SD-860 - Manual (Page 25)

25
PLAYING TRACKS IN DESIRED ORDER
In the stop mode, press the PROGRAM button.
1
Repeat the above step 2 until the desired tracks are programmed.
3
• Then the program mode is displayed on the TV screen.
• When the PROGRAM button is pressed again, the
program mode is canceled.
Clearing the programmed tracks
[ To clear one by one ]
• During programming, press the CLEAR button.
[ To clear all programmed tracks ]
• During programming or when the STOP( ) button is
pressed to stop program playback, press the PROGRAM
button.
To start program playback, press the PLAY( ) button or the ENTER button.
4
Select the desired track with pressing the NUMERIC buttons on the remote control.
Example) When the track 5 and 12 are programmed.
• For 5 :
• For 12 :
2
• Playback will start in the programmed order.
• After all programmed tracks have been played, it enters
the stop mode without clearing the programmed
tracks.(Program playback is suspended.)
• Up to 25 tracks can be programmed to be played in any desired order.
RC
PROGRAM P 00:00
RC • Each time this button is pressed, the programmed tracks
are cleared one by one in the opposite order.
• Once program playback is performed, you cannot clear
one by one.
• Then the programmed tracks are all cleared.
• Opening the disc tray clears all programmed tracks.
RC
Main unit RC RC
or or
PROGRAM P 01:05
PROGRAM P 02:12
Programmed track number
Programmed order