Sherwood SD-860 - Manual (Page 41)

41
Continued
3
Press the CURSOR / buttons to select ON, then press the ENTER button.
4
Press the CURSOR button to select the item menu.
5
Press the CURSOR / buttons to select the preferred channel to be adjusted, then press the CURSOR button
to select its setting menu.
• Each time the CURSOR or button is pressed, the
setting menu or the item menu is selected.
• Then the test tone function will work.
• When OFF is selected, the test tone function will be
deactivated.
• Each time the CURSOR or button is pressed, the
item menu or the setting menu is selected.
• Each time the CURSOR or button is pressed, the
setting menu or the item menu is selected.
Note :
• You cannot select the speakers set to NO or NONE.
1
Press the CURSOR / buttons to select the CHANNEL LEVEL, then press the ENTER button.
2
Press the CURSOR / buttons to select the TEST TONE, then press the CURSOR button to select
the its setting menu.
RC RC
RC RC
Item menu Setting menu
CHANNEL LEVEL
TEST TONE
FRONT L
CENTER
FRONT R
SURROUND R
SURROUND L
SUBWOOFER
ON
OFF
RC RC
When selecting the CHANNEL LEVEL
RC RC
RC